Close
Emergency Power PlanningEngineering

Case Study: Battery Backup Power for an Aviation Obstruction Light on a Rollercoaster 

An amusement park needed battery backup power for an FAA obstruction light at the top of a rollercoaster. The goal was to keep the light operating during a utility outage, maintaining visibility of the structure to aircraft. 

The park turned to EverSafe for a dedicated solution that could support the light’s electrical demand and connect to its existing power circuit. 

The selected solution was a hardwired SaverCell Stack battery backup power system with 2,400 watts of single-phase output and 4.2 kWh of battery capacity. 

The Challenge: Support the Obstruction Light During an Outage 

The park needed backup power for the obstruction light regardless of whether the rollercoaster was operating. 

System selection required consideration of the light’s electrical demand, required backup duration, and connection to the existing circuit. The system’s power output needed to accommodate the light’s load, while battery capacity needed to support the intended runtime. 

The Approach: Provide Dedicated Backup for the Lighting Circuit 

A hardwired configuration addressed the need to connect the battery backup system to the circuit serving the obstruction light. 

This approach provides stored battery power when utility power is unavailable. Sizing considers both the connected load and the required backup duration, with actual runtime depending on the light’s consumption and operating conditions. 

The Selected Solution: SaverCell Stack Battery Backup 

The selected SaverCell Stack system provides 2,400 watts (2.4 kW) of single-phase output and 4.2 kWh of battery capacity. 

Its hardwired connection supports integration with the obstruction light’s power circuit, providing dedicated backup for this application. 

Project at a Glance 

  • Application: Rollercoaster aviation obstruction lighting at an amusement park
  • Selected system: SaverCell Stack 
  • Connection: Hardwired 
  • Power output: 2,400 watts (2.4 kW) 
  • Battery capacity: 4.2 kWh 
  • Phase: Single-phase 
  • Equipment protected: FAA obstruction light at the top of a rollercoaster 

Build the Backup Plan Around Essential Equipment 

Backup power planning should include equipment that remains necessary outside normal operating hours. For this amusement park, that included the rollercoaster’s obstruction light. 

EverSafe helps facilities assess equipment loads, runtime needs, and connection requirements to select a battery backup system suited to the application. 

Planning backup power for essential equipment? Call 1.800.765.3237 or visit eversafepower.com to request your free power assessment. 

Share this article

Further Reading

A Local Power Outage Can Stop Business Without Becoming National News 
Emergency Power Planning

A Local Power Outage Can Stop Business Without Becoming National News 

On September 30, 2026, an unplanned power outage interrupted the morning commute at San Francisco’s Ferry Building and nearby businesses. PG&E reported approximately 455 customers affected.

Read more
Why Fall May Be the Perfect Time to Review Your Backup Power Plan
Emergency Power Planning

Why Fall May Be the Perfect Time to Review Your Backup Power Plan

Summer heat often prompts businesses to review their backup power plans. But an October grid emergency in the Mid-Atlantic offers a reason to keep power continuity on the agenda after temperatures begin to fall.

Read more
Can Battery Backup Protect Your Servers, Networks, and Communications Equipment? 
Communications InfrastructureNetworks

Can Battery Backup Protect Your Servers, Networks, and Communications Equipment? 

EverSafe provides battery backup solutions for servers and networking equipment, sized around the connected load and required runtime.

Read more